Différences

Ci-dessous, les différences entre deux révisions de la page.

--- gts_tourmaker_hud2 [2026/06/07 20:05] – admin
+++ gts_tourmaker_hud2 [2026/06/08 10:57] (Version actuelle) – admin
@@ Ligne 18: / Ligne 18: @@
 Just put the notecard into the vehicle (called Guide) Then put that Guide into the guided tour base
-**Chat Commands** you can say in local. They concern HUD settings and won't be recorded in tour notecard.
-|Zoffset n.nn|Add value n.nn meters to altitude of all future points you store, usefull if you want to setup a tour by walking and have your tour fly 2m above ( Zoffset 2.00 ) cancel with Zoffset 0.0|
-|Zforce nn.nn|Forces a LOCKED Z axis value (for making Boat Tours mainly)(Zforce 20.243)|
-|Vdist nn.nn|Set the distance for the lookAt point. Each time you touch the hud 2 <x,y,z> coordinates are saved first is where you are and where the guide will go during tour, second is lookat meters away in the direction your camera is looking when you touch, if in 'cam' mode guide will point toward that point during the ride. 20m is default|
 ** Other buttons on HUD :**
   * __to change HUD settings__
-  * **Clear** Clear the memory before starting a new tour.
-  * **Save** Gives you a weblink to copy all your tour and paste in a notecard for the vehicle. the HUD uses a [[web Database]] for this
-  * **Zlock** All your waypoints after that will be at your actual altitude.
-  * **Zforce 20** Same but at altitude 20m. Use that for boat tours. For another altitude use chat command Zforce nn.nn
-  * **Zunlock** Unlocks altitude.
-  * __to insert special commands in your tour__
-  * **CamView** inserts a command to fix riders camera at a point (to focus them on some detail)
-    * Set your camera where you want and cick
-    * instruction it generate is @<x,y,z>@<x,y,z>@ camera position ant camera target.
-  * **CamFree** inserts a command to free riders camera from a CamView
-    * @free@@
-  * **Del** delete last command, comment or waypoint. if you don't have Del ask for last HUD or get update
   * **Tilt** to set how vehicle will tilt vertically during ride from that point on.
     * **flat**. stay horizontal  point. point up-down to next point
@@ Ligne 49: / Ligne 30: @@
     * **point**. point to next point
     * **Cam**. points depending recorded lookat point
+  * **Exit** Detaches the HUD.
+  * **CamView** inserts a command to fix riders camera at a point (to focus them on some detail)
+    * Set your camera where you want and click OK
+    * instruction it generate is @<x,y,z>@<x,y,z>@ camera position ant camera target.
+  * **CamFree** inserts a command to free riders camera from a CamView
+    * @free@@
+  * **Del** delete last command, comment or waypoint.
+  * **Zlock** All your waypoints after that will be at your actual altitude.
+  * **Zforce 20** Same but at altitude 20m. Use that for boat tours. For another altitude use chat command Zforce nn.nn. //Use chat command Zforce 42.5 to block altitude to 42.5 m//
+  * **Zunlock** Unlocks altitude.
+  * **Help** Brought you here.
+  * **Clear** Clear the memory before starting a new tour.
+  * **Save** Gives you a weblink to copy all your tour and paste in a notecard for the vehicle. the HUD uses a [[web Database]] for this
+**Chat Commands** you can say in local. They concern more HUD settings and won't be recorded in tour notecard.
+|Zoffset n.nn|Add value n.nn meters to altitude of all future points you store, usefull if you want to setup a tour by walking and have your tour fly 2m above ( Zoffset 2.00 ) cancel with Zoffset 0.0|
+|Zforce nn.nn|Forces a LOCKED Z axis value (for making Boat Tours mainly)(Zforce 20.243)|
+|Vdist nn.nn|Set the distance for the lookAt point. Each time you add waypoint, two <x,y,z> coordinates are saved first is where the guide will go during tour, second is lookat meters away in the direction your camera is looking when you touch, if in 'cam' mode guide will point toward that point during the ride. 20m is default|
+**Everything else you chat will be recorded **
+  * As text to whisper during the ride. except:
+  * As **[[https://hudbook.net/GTS_commands.pdf|special commands]]** if line start with $. most used $commands are
+    * $,speed,n,  to change speed during ride
+    * $,pause,n,  to wait some seconds before proceeding
+  * As notes for yourself if line starts with / . Notes are useful when you modify your tour notecard later