BT_Wiki

Cette page est en lecture seule. Vous pouvez afficher le texte source, mais ne pourrez pas le modifier. Contactez votre administrateur si vous pensez qu'il s'agit d'une erreur.
===== In Home Security =====

[[https://marketplace.secondlife.com/p/in-home-security/25394196|marketplace]]  V 4.1

{{:inhome.jpg?400|}}

**IMPORTANT**
Security is made of two objects 
  * **In Home Security** (copy mod) you own and that does most of the job. 
    * It contains a **notecard** for defaults parameters that normally **don't need to be modified** almost everything is done via the orb menu.
    * If you use the security for **sub-tenants** you can modify the notecard to your preferred defaults and add co-owners. When a tenant leaves you just reset all from menu.
  * **Land Ejector** (copy trans) that must have same owner as the land and does the eject job. So if your land is group owned, deed that object to group or share it then ask a group officer to deed it. **Only ONE** Ejector is needed per owner on a region even if you use several securities

The system uses a technique to protect from intrusions above the device to a height you define. This allows making more precise protected zone than by a scan range or protecting the whole parcel.

As delivered it's two prims. The control orb and a floor. to install, place the floor just below your house and resize it using edit linked to fit the footprint of your house. Then move the control orb where you want. 

You can add more prims to define a more complex protected area but the control **orb must always stay the root prim**. (select it last when you link)

When someone enters the protected area this will be detected after a few seconds. If not on residents or managers lists, action will be taken OR, if any manager/resident around they will get a dialog to choose if they accept the guest. If none accepts within a delay, action is taken. 

**Action** can be
  * eject
  * tp to home
  * ban from parcel
  * tp home+ban

It classes avatars in 5 categories
  * **pending ** An avatar just arrived and waiting for a manager or a resident to accept entry
  * **guest** An accepted avatar, allowed in zone for a limited time
  * **resident** An avatar always allowed in and optionally that can accept entry of guests
  * **manager** Have limited access to menu
  * **owner** have full access to menu. Owner is considered manager when in the zone. Add yourself also as manager if you need to get guest acceptance requests from outside the protected zone


==== Menu ====
Orb has a menu for basic functions for owners and managers

{{:inhome_menu.jpg?400|}}
  * **Close** to close this menu
  * **Add Resident** to add one of the present guests or anyone by it's UUID as resident.
  * **Add Manager** to add one of the present guests or anyone by it's UUID as manager
  * **Remove** to remove someone from residents and managers lists
  * **List Guests** to get a list of present guests
  * **Del Guest** to eject a guest
  * **Visible** toggle visibility between invisible - visible - visible with overtext
  * **Height** to enter height above the device you want to protect
  * **List** to get a listing of all managers and residents
  * **Off** to turn off security
  * **Params** see below

Params brings another menu for rarely changed parameters

{{:inhome_params.jpg?400|{{:secparams.jpg?400|}}

That menu shows you one of the parameters with name, value and description. Managers and Owners can access it and see settings but some settings are changeable only by Owners
  * **Exit** to close that menu
  * **HELP** brings you here
  * **<< <<** displays previous parameter
  * **>> >>** displays next parameter
  * **Change** to change the value of this parameter. becomes **Ask Owner** if you can't change that parameter
  * //following acts on all parameters, not only the one displayed. available only to owners//
  * **Reset Params** to RESET all the parameters to default values but not the list of managers and residents
  * **Reset Residents** to RESET the list of residents. usefull for rented homes as you can add the tenant as manager, he can add residents himself. When he leaves you reset residents and just remove him,
  * **Reset ALL** to RESET all parameters and clear the managers/residents list. only owner will remain in list
    * defaults notecard defines the settings applied when you reset Params or Reset ALL. you can modify it if you know what you're doing
    * **MOST PARAMETERS CAN BE ADJUSTED USING MENU**. Modification of the defaults via notecard apply only after a RESET ALL
    * you can add "co-owners" by editing the defaults notecard and add for each one a line in it like this one. //(replace UUID by uuid of co-owner)// co-owners will be added after a reset
    * <code>own§UUID§§ok</code>

==== Settings ====

^ Setting^Description ^ Access ^
| displayguests|Do we show all present ppl on overtext or only those that can accept guests?|managers|
| residentcanaccept|Can residents accept guest? or only managers|managers|
| acceptanywhere|Accept from anywhere on sim or only inside protected zone|managers|
| duration|How long guest is allowed in minutes (unless timechoice is Yes)|managers|
| timechoice|Do we get a choice of durations when accepting or not?|managers|
| times|Choice of durations in minutes|managers|
| interval|Scan interval in seconds|owners|
| delay|Delay to be accepted before ejection in seconds|managers|
| warnmess|Intruder warn message|managers|
| ejectmess|Intruder eject message|managers|
| height|Height in m. over the security floor that is protected|owners|
| action|Type of eject action|owners|
| maxhit|Max number of prims between intruder and security floor. 20 is good. | owners |
| chan|Communications channel, change it if you use more than one device on same sim|owners|


==== Land Ejector ====
  * When rezzed the ejector will tell you if it needs to be deeded to land group. Once deeder it will remember you are its ex-owner and work only with securities you own
  * If you install several securities on same region you only need one ejector.
  * When owner clicks on the Land Ejector, you get a menu
    * **Delete** to delete the ejector. Even deeded
    * **Log** to list ejections 
    * **Clear** to clear ejections list
    * **Ban time** to set a ban duration time. set 0 for permanent ban. useful if you set your renters securities to ban