Différences

Ci-dessous, les différences entre deux révisions de la page.

--- in_home_security [2023/11/08 13:36] – [Settings] admin
+++ in_home_security [2025/04/16 18:16] (Version actuelle) – admin
@@ Ligne 7: / Ligne 7: @@
 **IMPORTANT**
 Security is made of two objects
-  * **In Home Security** you own and that does most of the job
+  * **In Home Security** (copy mod) you own and that does most of the job.
-  * **Land Ejector** that must have same owner as the land and does the eject job. So if your land is group owned, deed that object to group or share it then ask a group officer to deed it. **Only ONE** Ejector is needed per owner on a region even if you use several securities
+    * It contains a **notecard** for defaults parameters that normally **don't need to be modified** almost everything is done via the orb menu.
+    * If you use the security for **sub-tenants** you can modify the notecard to your preferred defaults and add co-owners. When a tenant leaves you just reset all from menu.
+  * **Land Ejector** (copy trans) that must have same owner as the land and does the eject job. So if your land is group owned, deed that object to group or share it then ask a group officer to deed it. **Only ONE** Ejector is needed per owner on a region even if you use several securities
 The system uses a technique to protect from intrusions above the device to a height you define. This allows making more precise protected zone than by a scan range or protecting the whole parcel.
@@ Ligne 32: / Ligne 34: @@
-==== In Home Security ====
+==== Menu ====
-Orb has a menu for basic functions
+Orb has a menu for basic functions for owners and managers
 {{:inhome_menu.jpg?400|}}
@@ Ligne 48: / Ligne 50: @@
   * **Params** see below
-Params brings owner another menu for rarely changed parameters
+Params brings another menu for rarely changed parameters
 {{:inhome_params.jpg?400|{{:secparams.jpg?400|}}
@@ Ligne 63: / Ligne 65: @@
   * **Reset ALL** to RESET all parameters and clear the managers/residents list. only owner will remain in list
     * defaults notecard defines the settings applied when you reset Params or Reset ALL. you can modify it if you know what you're doing
+    * **MOST PARAMETERS CAN BE ADJUSTED USING MENU**. Modification of the defaults via notecard apply only after a RESET ALL
     * you can add "co-owners" by editing the defaults notecard and add for each one a line in it like this one. //(replace UUID by uuid of co-owner)// co-owners will be added after a reset
     * <code>own§UUID§§ok</code>