Différences

Ci-dessous, les différences entre deux révisions de la page.

--- in_home_security [2023/11/04 12:04] – admin
+++ in_home_security [2025/04/16 18:16] (Version actuelle) – admin
@@ Ligne 7: / Ligne 7: @@
 **IMPORTANT**
 Security is made of two objects
-  * **In Home Security** you own and that does most of the job
+  * **In Home Security** (copy mod) you own and that does most of the job.
-  * **Land Ejector** that must have same owner as the land and does the eject job. So if your land is group owned, deed that object to group or share it then ask a group officer to deed it. **Only ONE** Ejector is needed per owner on a region even if you use several securities
+    * It contains a **notecard** for defaults parameters that normally **don't need to be modified** almost everything is done via the orb menu.
+    * If you use the security for **sub-tenants** you can modify the notecard to your preferred defaults and add co-owners. When a tenant leaves you just reset all from menu.
+  * **Land Ejector** (copy trans) that must have same owner as the land and does the eject job. So if your land is group owned, deed that object to group or share it then ask a group officer to deed it. **Only ONE** Ejector is needed per owner on a region even if you use several securities
 The system uses a technique to protect from intrusions above the device to a height you define. This allows making more precise protected zone than by a scan range or protecting the whole parcel.
@@ Ligne 32: / Ligne 34: @@
-==== In Home Security ====
+==== Menu ====
-Orb has a menu for basic functions
+Orb has a menu for basic functions for owners and managers
 {{:inhome_menu.jpg?400|}}
@@ Ligne 48: / Ligne 50: @@
   * **Params** see below
-Params brings owner another menu for rarely changed parameters
+Params brings another menu for rarely changed parameters
-{{:inhome_params.jpg?400|{{:secparams.jpg?400|}}}}
+{{:inhome_params.jpg?400|{{:secparams.jpg?400|}}
 That menu shows you one of the parameters with name, value and description. Managers and Owners can access it and see settings but some settings are changeable only by Owners
@@ Ligne 63: / Ligne 65: @@
   * **Reset ALL** to RESET all parameters and clear the managers/residents list. only owner will remain in list
     * defaults notecard defines the settings applied when you reset Params or Reset ALL. you can modify it if you know what you're doing
+    * **MOST PARAMETERS CAN BE ADJUSTED USING MENU**. Modification of the defaults via notecard apply only after a RESET ALL
     * you can add "co-owners" by editing the defaults notecard and add for each one a line in it like this one. //(replace UUID by uuid of co-owner)// co-owners will be added after a reset
     * <code>own§UUID§§ok</code>
@@ Ligne 68: / Ligne 71: @@
 ==== Settings ====
-^ Setting ^description ^access ^
+^ Setting^Description ^ Access ^
-|displayguests|Do we show all present ppl on overtext or only those that can accept guests?|managers|
+| displayguests|Do we show all present ppl on overtext or only those that can accept guests?|managers|
-|residentcanaccept|Can residents accept guest? or only managers|managers|
+| residentcanaccept|Can residents accept guest? or only managers|managers|
-|acceptanywhere|Accept from anywhere on sim or only inside protected zone|managers|
+| acceptanywhere|Accept from anywhere on sim or only inside protected zone|managers|
-|duration|How long guest is allowed in minutes (unless timechoice is Yes)|managers|
+| duration|How long guest is allowed in minutes (unless timechoice is Yes)|managers|
-|timechoice|Do we get a choice of durations when accepting or not?|managers|
+| timechoice|Do we get a choice of durations when accepting or not?|managers|
-|times|Choice of durations in minutes|managers|
+| times|Choice of durations in minutes|managers|
-|interval|Scan interval in seconds|owners|
+| interval|Scan interval in seconds|owners|
-|delay|Delay to be accepted before ejection in seconds|managers|
+| delay|Delay to be accepted before ejection in seconds|managers|
-|warnmess|Intruder warn message|managers|
+| warnmess|Intruder warn message|managers|
-|ejectmess|Intruder eject message|managers|
+| ejectmess|Intruder eject message|managers|
-|height|Height in m. over the security floor that is protected|owners|
+| height|Height in m. over the security floor that is protected|owners|
-|action|Type of eject action|owners|
+| action|Type of eject action|owners|
-|chan|Communications channel, change it if you use more than one device on same sim|owners|
+| maxhit|Max number of prims between intruder and security floor. 20 is good. | owners |
+| chan|Communications channel, change it if you use more than one device on same sim|owners|
 ==== Land Ejector ====
-  * When rezzed the ejector will tell you if it needs to be deeded to land group-
+  * When rezzed the ejector will tell you if it needs to be deeded to land group. Once deeder it will remember you are its ex-owner and work only with securities you own
   * If you install several securities on same region you only need one ejector.
   * When owner clicks on the Land Ejector, you get a menu
-    * **Delete** to delete the ejector
+    * **Delete** to delete the ejector. Even deeded
     * **Log** to list ejections
     * **Clear** to clear ejections list
-    * **Ban time** to set a ban duration time. set 0 for permanent time. useful if you set your renters securities to ban
+    * **Ban time** to set a ban duration time. set 0 for permanent ban. useful if you set your renters securities to ban