Différences

Ci-dessous, les différences entre deux révisions de la page.

--- gts_tourmaker_hud [2022/12/19 15:10] – admin
+++ gts_tourmaker_hud [2025/01/07 15:52] (Version actuelle) – admin
@@ Ligne 1: / Ligne 1: @@
-Instructions for TourMaker HUD
+====== Instructions for TourMaker HUD ======  [[guidedtour|Back to guidedtour page]]
-===================
-Just wear the HUD.
-  * Say clear to erase any previous work
+**Just wear the HUD.** {{ :hud.jpg?200 |}}
+  * Use menu to clear any previous work if needed
   * Go to your tour starting point
-  * start to chat your commentary
+  * Start to chat your commentary
-  * move to the first tour point, not too far from starting point and
+  * Move to the first tour point, not too far from starting point and check that starting point is visible from there.
-  check that starting point is visible from there.
+  * Click on the HUD, it will beep to tell you that position and direction are saved when taking the tour, the vehicle will move to that position
-  * Click on the HUD, it will beep to tell you that position and direction are saved when taking the tour, the vehicle will move to that position and orient itself in the direction you were looking when you clicked the hud
+  * A second parameter is recorded: a point 20m ahead of you in the direction your looking at. That info will be used if you later set tilt or rot parameter to "cam"
-  * Continue typing your comments and move to steps of your tour every time you save another position by clicking the HUD a red cone will rez always check that precedent red ball is visible from next step otherwise your tour may collide with objects in the way. Phantom objects like trees do not count.
+  * Continue typing your comments and move to steps of your tour every time you save another position by clicking the HUD a red cone will rez always check that precedent red cone is visible from next step otherwise your tour may collide with objects in the way. Phantom objects like trees do not count.
-  * When arrived at the end of the tour and last position stored just say "save"
+  * When arrived at the end of the tour and last position stored just go to menu and "save"
-    the HUD will tell you a link to your tour on the web. open link, and copy-paste text to a notecard
+    the HUD will tell you a weblink to your tour on the web. open link, and copy-paste text to a notecard
-I suggest you rename this notecard "english". You can later copy it and translate it in other languages
-You can now detach the HUD from yourself.
+I suggest you rename this notecard "english". You can later copy it and translate it in other languages. Notecard name is only relevant when you put more than one notecard in your vehicle to give riders a choice of tours or languages. In that case, names must be short to appear in a menu.
-Just put the notecard into the vehicle (called Guide)
+You can now detach the HUD from yourself. Memory is not cleared and you can later wear it again to continue tour.
-Then put that Guide into the guided tour base
+Just put the notecard into the vehicle (called Guide) Then put that Guide into the guided tour base
-Commands:
-clear         Empty HUD memory to start tour building from scratch
-save          tells you a link to your tour on the web. open link, and copy-paste text to a notecard
-Zlock         Lock all future travel points to your actual altitude, usefull to set flat tours like boats
-Zunlock       Unlock the z axis
-Zoffset n.nn  Add value n.nn meters to altitude of all future points you store, usefull if you want
-              to setup a tour by walking and have your tour fly 2m above ( Zoffset 2.00 )
-              cancel with Zoffset 0.0
-Zforce n.nn   Forces a LOCKED Z axis value (for making Boat Tours mainly)
-                (Zforce 20.243)
-Vdist nn.n  Set the distance for the lookAt point. Each time you touch the hud 2 <x,y,z> coordinates are saved
-                first is where you are and where the guide will go during tour, second is lookat meters away in
-                the direction your camera is looking when you touch, if in 'cam' mode guide will point toward that point during
-                the ride. 20m is default
-MENU
+**Chat Commands** you can say in local. They concern HUD settings and won't be recorded in tour notecard.
-Menu button on HUD gives you same choices you can chat above PLUS more options:
+|Zoffset n.nn|Add value n.nn meters to altitude of all future points you store, usefull if you want to setup a tour by walking and have your tour fly 2m above ( Zoffset 2.00 ) cancel with Zoffset 0.0|
+|Zforce nn.nn|Forces a LOCKED Z axis value (for making Boat Tours mainly)(Zforce 20.243)|
+|Vdist nn.nn|Set the distance for the lookAt point. Each time you touch the hud 2 <x,y,z> coordinates are saved first is where you are and where the guide will go during tour, second is lookat meters away in the direction your camera is looking when you touch, if in 'cam' mode guide will point toward that point during the ride. 20m is default|
-Tilt    to set how vehicle will tilt during ride from that point on.
+**MENU** button on HUD :
-        flat. stay horizontal  point. point up-down to next point  Cam. points depending recorded lookat point
-Rot     to set how vehicle will turn during ride from that point on.
-        no rot. no rotation  point. point to next point  Cam. points depending recorded lookat point
-CamView inserts a command to fix riders camera at a point (to focus them on some detail)
+  * __to change HUD settings__
-CamFree inserts a command to free riders camera from a CamView
+  * **Clear** Clear the memory before starting a new tour.
+  * **Save** Gives you a weblink to copy all your tour and paste in a notecard for the vehicle. the HUD uses a [[web Database]] for this
+  * **Zlock** All your waypoints after that will be at your actual altitude.
+  * **Zforce 20** Same but at altitude 20m. Use that for boat tours. For another altitude use chat command Zforce nn.nn
+  * **Zunlock** Unlocks altitude.
+  * __to insert special commands in your tour__
+  * **CamView** inserts a command to fix riders camera at a point (to focus them on some detail)
+    * Set your camera where you want and cick
+    * instruction it generate is @<x,y,z>@<x,y,z>@ camera position ant camera target.
+  * **CamFree** inserts a command to free riders camera from a CamView
+    * @free@@
+  * **Del** delete last command, comment or waypoint. if you don't have Del ask for last HUD or get update
+  * **Tilt** to set how vehicle will tilt vertically during ride from that point on.
+    * **flat**. stay horizontal  point. point up-down to next point
+    * **point**. point to next point
+    * **Cam**. points depending recorded lookat point
+  * **Rot** to set how vehicle will turn horizontally during ride from that point on.
+    * **no rot**. no rotation
+    * **point**. point to next point
+    * **Cam**. points depending recorded lookat point
-CLOCK
-Clock button on HUD turns on an experimental auto-make points